d&b audiotechnik J12 Loudspeaker

d&b audiotechnik J12 Loudspeaker
d&b audiotechnik J12 Loudspeakerd&b audiotechnik J12 Loudspeaker

Hire d&b audiotechnik J12 Loudspeaker

    • Day£ 60.00
    • Weekend£ 90.00
    • Week£ 120.00
Category Specification
System Type Three-way active line array loudspeaker
Intended Use Touring sound reinforcement and permanent installation
Nominal Horizontal Dispersion 120°
Maximum Array Size Up to 24 cabinets (flown)
Vertical Splay Angles 0° to 7° in 1° increments
Low-Frequency Transducers 2 × 12" neodymium drivers
Mid-Frequency Transducer 1 × 10" horn-loaded neodymium driver
High-Frequency Transducers 2 × 1.4" exit compression drivers with 3" voice coils
Wave-Shaping Technology Integrated for coherent summation and vertical control
Frequency Response 60 Hz – 18 kHz
Maximum SPL (Peak) Up to 143 dB
Directivity Constant horizontal dispersion; array-dependent vertical control
Nominal Power Handling (LF) 2 × 400 W
Nominal Power Handling (MF) 300 W
Nominal Power Handling (HF) 150 W
Nominal Impedance 4 Ω
Recommended Amplifiers d&b J-Series amplifiers (e.g., D80)
Signal Processing Dedicated J12 presets, array processing, protection limiting
Input / Link Connectors 2 × NL4
Enclosure Material Marine-grade plywood
Cabinet Finish Polyurea Cabinet Protection (PCP)
Grille Steel grille with acoustically transparent foam
Rigging System Integrated three-point rigging hardware
Dimensions (H × W × D) Approx. 368 × 1100 × 525 mm
Weight Approx. 56 kg (123 lb)
Operating Temperature Range –10 °C to +50 °C
Environmental Suitability Outdoor use with appropriate system protection
System Compatibility d&b J-Series components (J8, J-SUB)
The J12 is a 3-way design housing 2 x 12" LF drivers, one hornloaded 10" MF driver and two 1.4" exit HF compression drivers with 3" voicecoils mounted to a dedicated waveshaping device. The mechanical and acoustical design enables flown vertical columns of up to 24 loudspeakers to be suspended using vertical splay angles between them of 0° to 7° with a 1° resolution. The cylindrical wave segments produced couple coherently in the vertical plane. Due to the dipolar arrangement of the neodymium LF drivers the exceptional 120° horizontal constant directivity dispersion control is nominally maintained down to 250 Hz. The J12 is acoustically and mechanically compatible to the J8 loudspeaker. It can be used in columns of purely J12 loudspeakers or combined with J8s and / or with J-SUBs. The

Terms and Conditions

By entering into this hire agreement you are accepting our Terms and Conditions of the Hire upon receipt of goods and/or services from SBS Audio Visual.

Receipt includes arrival of equipment and/or staff on an event site, whether the customer is present or not. All equipment hired remains the property of SBS Audio Visual Ltd at all times.

Payment by the Customer on time under the Contract is an essential condition of the Contract. Payment shall not be deemed to be made until SBS Audio Visual has received either cash or cleared funds in respect of the full amount outstanding. If the Customer fails to make any payment in full on the due date we may charge the Customer interest on the amount unpaid at the rate of 8% implied by law under the Late Payment of Commercial Debts (Interest) Act 1998.

The Customer shall pay all sums due to the Supplier under this Contract without any set-off, deduction, counterclaim and/or any other withholding of monies.

The Hirer accepts full responsibility to SBS Audio Visual for loss or damage to or destruction of the equipment suffered during the period of hire from whatever cause the same may arise and is fully responsible for the safekeeping of the equipment and its return in equal order to SBS Audio Visual at the end of the hire.

The Hirer accepts all liability & responsibility in respect of & shall & completely indemnify SBS Audio Visual against all third party claims & losses howsoever arising in respect of damage to or loss or destruction of any property or in respect of the personal injury or death of anybody in any way caused by or relating to the equipment or its use.

Category Specification
System Type Three-way active line array loudspeaker
Intended Use Touring sound reinforcement and permanent installation
Nominal Horizontal Dispersion 120°
Maximum Array Size Up to 24 cabinets (flown)
Vertical Splay Angles 0° to 7° in 1° increments
Low-Frequency Transducers 2 × 12" neodymium drivers
Mid-Frequency Transducer 1 × 10" horn-loaded neodymium driver
High-Frequency Transducers 2 × 1.4" exit compression drivers with 3" voice coils
Wave-Shaping Technology Integrated for coherent summation and vertical control
Frequency Response 60 Hz – 18 kHz
Maximum SPL (Peak) Up to 143 dB
Directivity Constant horizontal dispersion; array-dependent vertical control
Nominal Power Handling (LF) 2 × 400 W
Nominal Power Handling (MF) 300 W
Nominal Power Handling (HF) 150 W
Nominal Impedance 4 Ω
Recommended Amplifiers d&b J-Series amplifiers (e.g., D80)
Signal Processing Dedicated J12 presets, array processing, protection limiting
Input / Link Connectors 2 × NL4
Enclosure Material Marine-grade plywood
Cabinet Finish Polyurea Cabinet Protection (PCP)
Grille Steel grille with acoustically transparent foam
Rigging System Integrated three-point rigging hardware
Dimensions (H × W × D) Approx. 368 × 1100 × 525 mm
Weight Approx. 56 kg (123 lb)
Operating Temperature Range –10 °C to +50 °C
Environmental Suitability Outdoor use with appropriate system protection
System Compatibility d&b J-Series components (J8, J-SUB)
Show more

Rent this item

Booking Fees

Day
£ 60.00

Weekend
£ 90.00

Week
£ 120.00

Choose booking dates

Start Date:

End Date:

Collection or Delivery

<
  • Collect in person
    You can collect your items free of charge from our warehouse in Manchester, collection times are 9am to 5pm Monday to Friday and Saturday by appointment.
  • Delivery
    Delivery costs start from £20.00 each way within a 20-mile radius of Manchester, further distances are possible and can be calculated once we have confirmed the delivery address.
    ** Please note we do not offer a courier service for areas outside of the Northwest **

Total: £120.00Enquire or Book

Other Sound

£5.00

ULTRA-DI DI20 The ULTRA-DI DI20 is a one-of-a-kind DI (Direct Injection) box that can convert up to two separate, unbalanced ¼ " TRS lines into two balanced XLR outputs – or function as a signal splitter. Electric guitarists, keyboardists and bassists will love the flexibility the incredible DI20 provides both in the studio and on the stage. Mono,...

£10.00

Focusrite Scarlett 4i4 Audio Interface (3rd Gen) When only two inputs aren't enough to capture your recordings, but you still require a compact and portable audio interface, look no further than the flexibility of the Focusrite Scarlett 4i4. Now you can capture your ever-expanding setup with more inputs, more outputs, and more connectivity....

£5.00

The sE7 is a high-quality back-electret small-diaphragm condenser microphone intended for a wide range of studio and live sound applications, from acoustic guitars to pianos to drums and beyond.

£7.50

Fit for any challenges in the studio or on stage, the sE8 is a brand new high-performance handcrafted small-diaphragm condenser, fresh from the labs at sE.

£5.00

The sibling to the acclaimed vocal-oriented V7, the V7 X is a dynamic instrument microphone ideal for a broad range of instrumental applications - both in the studio and on stage.

£7.50

The most compact & flexible drum mic in its class. Superior isolation and effortless performance for snares & toms, all with minimal footprint and maximum flexibility. The V BEAT is the most compact drum microphone in its class, intended for use with snare or tom drums. Its specialised capsule provides a highly detailed, extremely natural sound...

£10.00

The V KICK is the most compact and versatile drum microphone in its class, built for drums where low-frequency energy is of the utmost importance.

£50.00

Fully equipped with the TEC Award winning V KICK and V BEAT microphones for unreal precision live and in the studio. Our sE Electronics Arena Microphone Kit consists of one V KICK for your bass drum, three V BEATs and V CLAMPS for your toms, one V7 X for your snare, a pair of sE7 condensers, and a sE8 condenser for your overheads.

£90.00

ES1002 comes with 2 subwoofers and 2 column tops, both powered by a class D DIGIPRO G3 amplifier delivering 1800 W peak. The top satellite is equipped with 8x4” mid-woofers, whose alignment allows an asymmetrical vertical coverage, avoiding any useless dispersion of the sound above the audience. Moreover, each mid-range woofer is provided with a newly...

£120.00

The J8 is a 3-way design housing 2 x 12" LF drivers, one hornloaded 10" MF driver and two 1.4" exit HF compression drivers with 3" voicecoils mounted to a dedicated waveshaping device. The mechanical and acoustical design enables flown vertical columns of up to 24 loudspeakers to be suspended using vertical splay angles between them of 0° to 7° with a 1°...

£160.00

The J-SUB is an actively driven 2-way bass-reflex design housing three long excursion neodymium 18" drivers, two drivers face to the front and one driver to the rear. The cardioid dispersion pattern resulting from this approach avoids unwanted energy behind the system, which greatly reduces the reverberant field at low frequencies and provides the...