d&b audiotechnik D80 Amplifier

  • d&b audiotechnik D80 Amplifier
  • d&b audiotechnik D80 Amplifier
  • d&b audiotechnik D80 Amplifier
d&b audiotechnik D80 Amplifier

Hire d&b audiotechnik D80 Amplifier

    • Day£ 70.00
    • Weekend£ 105.00
    • Week£ 210.00

Digital Signal Processing
Equalizer: 2 x 16-band PEQ/notch/shelving/asymmetric
Latency analog and digital inputs: 0.3 msec.
Delay setting: 0.3 - 10000 msec.
Configurations: current d&b loudspeakers and linear mode
Function switches: d&b loudspeaker specific circuits
Frequency generator: Pink noise or Sine wave
Sampling rate: 96 kHz/27 Bit ADC/24 Bit DAC

Controls and indicators
Power: Mains power switch
Scroll/Edit: Digital rotary encoder
Display: Colour TFT touchscreen, 3.5"/320 x 240 pixel
ISP, GR, OVL A/B: Colour TFT

Connectors
INPUT ANALOG (A1 - A4): 3 pin XLR female
ANALOG LINK (A1 - A4): 3 pin XLR male
INPUT DIGITAL (D1/2, D3/4): 3 pin XLR female AES 3
DIGITAL LINK (Output): 3 pin XLR male
Sampling Digital AES/EBU: 48 kHz/96 kHz
Speaker outputs A/B/C/D: NL4, optional EP5
4 Channel output: NL8
CAN: 2 x RJ 45 parallel
ETHERNET: 2 x etherCON®, 10/100 Mbit Ethernet
Mains connector: powerCON®-HC

Data (linear setting with subsonic filter)
Maximum output power per channel (THD+N < 0.5%, all channels driven)
CF = 6 dB at 4 / 8 ohms - 4 x 2600/2000 W
CF = 12 dB at 4 / 8 ohms - 4 x 4000/2000 W
S/N ratio (unweighted, RMS)
Analog input - -
Digital input - > 114 dBr

Power supply
Type: Autosensing switch mode power supply with active Power Factor Correction (PFC)
Rated mains voltage high range: 208 - 240 V, 50 - 60 Hz
Rated mains voltage low range:100 - 127 V, 50 - 60 Hz

Dimensions / weight
Dimensions (H x W x D): 2 RU x 19" x 530.5 mm/20.9"
Weight: 19 kg/42 lb

D80 amplifier is a four channel high power density amplifier incorporating digital signal processors (DSP) to provide loudspeaker specific configurations and functions. Designed for use with all d&b loudspeakers, has both digital and analogue signal inputs as well as link outputs, remote control and monitoring capabilities and sophisticated protection circuits. The D80 is a Class D amplifier specifically designed to deliver high power into low impedance loads between 4 and 16 ohms and utilises a switch mode power supply with Power Factor Correction (PFC) suitable for mains voltages 100 - 127 V/208 - 240 V, 50 - 60 Hz. The signal delay capability allows user definable settings of up to 10 s (3440 m/11286 ft) to be applied independently to each channel. The same applies to the two 16-

Terms and Conditions

By entering into this hire agreement you are accepting our Terms and Conditions of the Hire upon receipt of goods and/or services from SBS Audio Visual.

Receipt includes arrival of equipment and/or staff on an event site, whether the customer is present or not. All equipment hired remains the property of SBS Audio Visual Ltd at all times.

Payment by the Customer on time under the Contract is an essential condition of the Contract. Payment shall not be deemed to be made until SBS Audio Visual has received either cash or cleared funds in respect of the full amount outstanding. If the Customer fails to make any payment in full on the due date we may charge the Customer interest on the amount unpaid at the rate of 8% implied by law under the Late Payment of Commercial Debts (Interest) Act 1998.

The Customer shall pay all sums due to the Supplier under this Contract without any set-off, deduction, counterclaim and/or any other withholding of monies.

The Hirer accepts full responsibility to SBS Audio Visual for loss or damage to or destruction of the equipment suffered during the period of hire from whatever cause the same may arise and is fully responsible for the safekeeping of the equipment and its return in equal order to SBS Audio Visual at the end of the hire.

The Hirer accepts all liability & responsibility in respect of & shall & completely indemnify SBS Audio Visual against all third party claims & losses howsoever arising in respect of damage to or loss or destruction of any property or in respect of the personal injury or death of anybody in any way caused by or relating to the equipment or its use.

Digital Signal Processing
Equalizer: 2 x 16-band PEQ/notch/shelving/asymmetric
Latency analog and digital inputs: 0.3 msec.
Delay setting: 0.3 - 10000 msec.
Configurations: current d&b loudspeakers and linear mode
Function switches: d&b loudspeaker specific circuits
Frequency generator: Pink noise or Sine wave
Sampling rate: 96 kHz/27 Bit ADC/24 Bit DAC

Controls and indicators
Power: Mains power switch
Scroll/Edit: Digital rotary encoder
Display: Colour TFT touchscreen, 3.5"/320 x 240 pixel
ISP, GR, OVL A/B: Colour TFT

Connectors
INPUT ANALOG (A1 - A4): 3 pin XLR female
ANALOG LINK (A1 - A4): 3 pin XLR male
INPUT DIGITAL (D1/2, D3/4): 3 pin XLR female AES 3
DIGITAL LINK (Output): 3 pin XLR male
Sampling Digital AES/EBU: 48 kHz/96 kHz
Speaker outputs A/B/C/D: NL4, optional EP5
4 Channel output: NL8
CAN: 2 x RJ 45 parallel
ETHERNET: 2 x etherCON®, 10/100 Mbit Ethernet
Mains connector: powerCON®-HC

Data (linear setting with subsonic filter)
Maximum output power per channel (THD+N < 0.5%, all channels driven)
CF = 6 dB at 4 / 8 ohms - 4 x 2600/2000 W
CF = 12 dB at 4 / 8 ohms - 4 x 4000/2000 W
S/N ratio (unweighted, RMS)
Analog input - -
Digital input - > 114 dBr

Power supply
Type: Autosensing switch mode power supply with active Power Factor Correction (PFC)
Rated mains voltage high range: 208 - 240 V, 50 - 60 Hz
Rated mains voltage low range:100 - 127 V, 50 - 60 Hz

Dimensions / weight
Dimensions (H x W x D): 2 RU x 19" x 530.5 mm/20.9"
Weight: 19 kg/42 lb

Show more

Rent this item

Booking Fees

Day
£ 70.00

Weekend
£ 105.00

Week
£ 210.00

Choose booking dates

Start Date:

End Date:

Collection or Delivery

<
  • Collect in person
    You can collect your items free of charge from our warehouse in Manchester, collection times are 9am to 5pm Monday to Friday and Saturday by appointment.
  • Delivery
    Delivery costs start from £20.00 each way within a 20-mile radius of Manchester, further distances are possible and can be calculated once we have confirmed the delivery address.
    ** Please note we do not offer a courier service for areas outside of the Northwest **

Total: £70.00Enquire or Book

Other Outboard Equipment

£5.00

The dbx® 2-Series Graphic Equalizers have been designed to meet the needs of the most demanding sound reinforcement environments, while offering the simplicity of straight forward controls. The 215 not only provides standard features like dual channels, 15 2/3 octave bands, ISO frequency meters, +/- 12dB input gain range, and switchable 50Hz/12dB octave...

£10.00

The DR100 mkII is based on the popular DR-100 recorder with extra features for a much more versatile portable recorder.The DR 100 mk2 delivers high-end recording with it's four built-in microphones, two cardioid and two omnidirectional. You also have the added option to use your own microphones a pair of XLR microphone inputs with phantom power; for...

£20.00

Most compressor/gates provide less than musical compression, coupled with gating that swallows transients—or closes early, cutting off decay and reverb tails. The superb engineering in the 266XL ensures that both its compression and gating provide versatility and excellent sonic performance in situations where other compressor/gates typically produce...

£20.00

Drive your PA to a whole new level of performance with the DriveRack® PA Complete Equalization & Loudspeaker Control System. The DriveRack PA from dbx Professional Products represents a complete integration of the key elements that help ensure optimal loudspeaker system management in PA-specific applications. Capitalizing on the legendary 480 DriveRack...

£20.00

The DriveRack PX Powered Speaker Optimizer has everything you need to get the most out of your stereo powered speaker system. It even includes stereo or mono subwoofer support. With the included dbx M2 measurement mic, Auto-EQ corrects for audible deficiencies in the room environment. 

£30.00

The SS-R1 is TASCAM's affordable single-rack-space Compact Flash recorder for the installation market. Designed for applications that previously used a cassette or MiniDisc recorder, the SS-R1 records in WAVE or MP3 formats to Compact Flash media. The recorder includes balanced and unbalanced audio inputs and outputs, RS-232 and parallel control and a...

£5.00

The PAN-04 consists of a housing containing the equivalent of two PAN-01s, making it a dual channel passive DI box. This "stereo" configuration makes it ideally suited for use with certain keyboards and devices which have several outputs. Attenuable input sensitivity, can handle both line level and speaker level signals.

£5.00

Stageline DIB-100 DI BoxAn optimum signal transmission from musical instruments to a mixer or amplifier. Using a transformer coupling, interferences due to matching problems, e.g. hum loops, are prevented to a large extent. Input and output are galvanically isolated.