DJM-S9

General

MIDI Control:  Full assignable MIDI controls

DVS Control:  Serato DJ

Auto Standby:  Yes

Software System Requirements: 

Windows 8.1/7 (CPU) Core i3, i5 or i7 1.07 GHz, (Memory) 4GB

Mac OS X 10.10/10.9/10.8 (CPU) Core i3, i5 or i7 1.07 GHz, (Memory) 4GB

Display Resolution:  1280 x 720 or higher

Physical & Dimensions

Width:  267 mm

Height:  107.9 mm

Depth:  407.3 mm

Weight:  4.6 kg

Rack Mount:  Yes

Frequency Range:  20 - 20,000 Hz

S/N Ratio USB:  107 dB

Distortion:  < 0.005 % (USB)

Master

Level Meter Size:  9 segment

Channels

EQ/ISO:  3 band

EQ/ISO Range:  -∞ ~ +6 dB

Reverse Channels:  Yes

Level Meter Type:  Individual

Peak Limiter:  Yes

Performance Control

Channels:  2

Sound Colour FX: 

Dub Echo

Filter

Noise

Pitch

Wide Filter

Beat FX: 

Back Spin

Delay

Echo

Fader Synth Saw

Fader Synth Sine

Fader Synth Square

Flanger

HP Filter

LP Filter

Phaser

Reverb

Roll

Spiral

Trans

Vinyl Brake

Serato DJ FX powered by iZotope:  Yes

Effect/Sampler

3-Band Isolator:  Yes

Auto BPM Counter:  Yes

Crossfader

Crossfader Type:  Magvel Fader Pro

CURVE Assignable:  Yes

Reverse Crossfader:  Yes

Tension Adjustment:  Yes

Mic

Mic Connection:  XLR / 1/4-inch Jack Combo

Talkover:  ON/OFF Button

Talkover Attenuator:  Yes

Sound card

Connection:  USB

Sample Rate:  24 bit

Frequency:  48 kHz

Terminals

Inputs: 

2 CD/LINE (RCA)

2 PHONO (RCA)

1 MIC (XLR/Jack Combo)

1 AUX (RCA)

Outputs: 

2 MASTER (XLR, RCA)

1 BOOTH (1/4 inch Jack)

2 HEADPHONE MONITOR (1/4 inch Jack, mini-jack)

USB:  2 USB B ports

PLX-1000

General

Included Accessories: 

Turntable sheet

Slip mat and sheet

Dust cover

Head shell

Balance, sub and shell weights

Audio cable

Ground wire

Physical & Dimensions

Width:  453 mm

Height:  159 mm

Depth:  353 mm

Weight:  14.6 kg

Turntables

Drive Method:  Quartz lock, servo-type, direct drive

Platter:  Aluminium, die-casting diameter: 332 mm

Motor:  3-phase, brushless DC motor

Braking System:  Electronic brake

Rotation Speed:  33⅓-45 rpm

Rotation Adjustment Range:  ±8, ±16, ±50 %

Wow and Flutter:  < 0.01 % (Measured by obtaining signal from built-in frequency generator of motor assembly.)

Signal-to-Noise Ratio:  70 dB

Starting Torque:  > 4.5 kgf・cm

Start Time:  Within 0.3 sec (at 33⅓ rpm)

Tone Arm

Arm Type: 

Universal type S-shape tone arm

Gimbal-supported type bearing structure

Static balance type

Overhang:  15 mm

Effective Length:  230 mm

Tracking Error:  Within 3°

Height Adjustment Range:  6 mm

Stylus Pressure Variable Range:  0-4 g (1 scale 0.1 g)

Single Cartridge Weight:  3.5-13 g

Terminals

Outputs:  1 ANALOGUE (RCA)

DJC-S9

General

Materials Used

EVA Durashock Molded Body

Black ballistic Polyester

Black fleeced lining

Lid egg-foam

Physical & Dimensions

External dimensions (W x D x H): 455 x 380 x 140 mm (excluding handle)

Internal dimensions (W x D x H): 435 x 340 x 120 mm

• DJM-S9

  MAGVEL FADER PRO:  Our durable Magvel Fader Pro magnetic crossfader delivers a smooth response. Use the Feeling Adjust dial to change the operational load, then modify the crossfader’s curve and reverse settings to your preference. Plus the mixer comes with shock-absorbing bumpers in 3 materials so you choose your level of rebound.

  PERFORMANCE PADS:  Use the highly responsive multi-colour pads to trigger to Hot Cue, Roll, Slice and Loop or map the pads to other Serato DJ functions. The EL display shows which mode is in play, and you can use Serato DJ to allocate colours to modes for an even stronger visual cue.

  CUSTOMISABLE FX BUTTONS:  6 Beat FX buttons and 6 Serato DJ FX* buttons, plus 2 banks, give you unprecedented choice. Fire up the pre-set Beat FX or replace them with other popular on-board FX. Map your favourite Serato DJ FX and their parameters to the 6 buttons on the right.

  * Serato DJ offers up to 45 different FX (paid expansion pack needed)

  FILTER FX:  Rotate the dial to add a high/low pass filter to FX on each channel, or use Serato DJ to switch to other filter FX like Dub Echo, Noise and Pitch.

  STYLE LEVERS:  Quickly turn effects on and off using the 2 large Style Levers. Trigger FX briefly, lock them on, or exit arrangements quickly.

  2 BUILT-IN USB SOUNDCARDS:  Play back-to-back with other DJs seamlessly using the input switcher on top to switch between all four Serato DJ decks. And if you prefer to play with CDJs or turntables, you can easily do so thanks to DVS support.

  ENHANCED MIC INPUT:  The MIC input features Echo FX and high-quality circuitry to eliminate unwanted distortion.

  CLIP DISPLAY:  The clip display shows you when your input levels are too high, while the peak limiter eliminates distortion on the Master output.

  MIDI CONTROLLER:  This device is fully MIDI assignable via USB. Send control information to external devices and use the mixer as a MIDI controller.

  MELODICS:  Pad drumming has become a trend for DJs. Melodics is an app that helps you to learn cue point drumming techniques and build muscle memory for amazing performances.

  PLX-1000

  TURN THE TABLES:  The high-torque direct drive ensures stable rotation and exceptional control – and it reaches 33⅓ rpm in just 0.3 seconds thanks to a starting torque of 4.5kg/cm (or more).

  EXCELLENT SOUND DESIGN:  The PLX-1000’s heavy-mass, die-cast zinc chassis prevents resonance and vibrations. The lower part of the unit is reinforced with 8mm-thick resin, plus 9mm-thick, vibration-damping material at the base. Plus the rubber-insulated tone arm reduces howling effects, while rubber and springs on the dampening parts of the insulator absorb external vibrations.

  PICK UP THE PACE:  Multi-tempo control lets you instantly pick up or slow down the track to ±8%, ±16% and ±50%, while a simple reset button instantly reverts to ±0%.

  FLEXIBLE CONNECTIVITY:  Interchangeable power and audio cables can be easily connected and replaced, and pro-grade gold-plated RCA jacks ensure low impedance and an amazing sound quality.

  DJC-S9

  A professional looking carry bag

  EVA Durashock Molded Body

  Egg-foam and fleeced lining prevent damage from vibrations and shocks

  Provides a safe & snug fit for the DJM-S9

  Additional compartments inside the case to safely store your cables and accessories

  Strong handles, with shoulder strap included 

   

   

30-Days Money Back!

At SBS we believe that you should always be completely happy with a product that you purchased. This is why we offer a No-Questions-Asked 30-Day Money Back Guarantee policy.

• Customers are free to return the item for refund or replacement within 30 days from the date of receipt. The product returned has to reach us by 30th day latest.
• Returns are only accepted if the item returned is in “as new” condition, with all original accessories included in undamaged packaging. If the product doesn’t meet these requirements the refund/replacement request may be rejected or a restocking fee of up to 20% may apply
• If the refund/replacement request is rejected the return-to-customer shipping fee may apply
• For some products returns are only accepted if products has been unused, unopened or sealed. These products include headphones, in-ear monitors, microphones, earplugs, software, turntable cartridges and stylus
• Unfortunately returns are not accepted on sensitive electronic components and circuit boards
• Please be aware that refund process can take up to 7 working days from the date of us receiving the product
• Products to be returned by customer at their own cost, unless dead on arrival

Delivery Info

Here at SBS we're playing it fair. Our delivery charges are calculated on-the-go depending on weight of the order and the price you pay is what courier companies charge us. Unlike our competitors - we don't earn that extra bit on every shipping, allowing us to have lowest possible shipping costs.

• Orders placed before 2pm UK time will be dispatched same day (subject to stock availability), orders placed after 2pm will be shipped next working day
• Expected delivery times are from 9am to 6pm, if shipped with courier option you will receive a text and email notification the day before delivery and then 1 hour window of delivery on the morning of delivery. If you need to ammend the delivery date or time or can respond direct to courier to re-arrange.
• If there is going to be a delay we will notify you by email within one working day of placing your order
• If an item is out of stock you will be notified within one working day of placing your order and you can decide whether you wish to wait for the item or to have a full refund. If a refund is required, this will be issued within one working day
• If you want to add extra delay to shipping please state it in comments with your order
• Collection available on all items (subject to stock availability) - please call us first to confirm when your item will be ready for collection